VNG Testing
Upper cushion with Velcro tape for eVNG mask (patient side)
Padding with Velcro tape (patient side) for the mask of the vestibularis systems eVNG, eHIT and eVNG/eHIT combination system. The mask is fixed in place with Velcro. The cushion is made up of two parts: upper cushion (patient side) and substructure of the cushion (article 735). Material: imitation leather.GTIN: 4260497345725Scope of delivery: 1 pieceevidENT-Shop Article 734
Available, delivery time: 1-3 days
Substructure with hook band for eVNG mask (rigid foam body)
Self-adhesive pad as substructure with hook tape for the mask of the vestibularis systems eVNG, eHIT, eVNG/eHIT combination system. The mask is fixed with adhesive tape to the mask.The cushion is in two parts: upper cushion (patient side) (article 734) and substructure of the cushion.GTIN: 4260497345718Scope of delivery: 1 pieceevidENT-Shop Article 735
Available, delivery time: 1-3 days
USB connection cable for eVNG mask and eHIT mask
Replacement cable with USB connection for eVNG mask or eHIT from BioMed. Dimensions: Length: 3 meters Scope of delivery: 1 cableevidENT-Shop Article 385
Available, delivery time: 1-3 days
Front panel for eVNG mask / eHIT mask
Spare part front panel / cover with 4 magnets. Made of black plastic. For the eVNG, eHIT and eVNG/eHIT system of the manufacturer Biomed Jena. Scope of delivery: 1 piece.evidENT-Shop Article 617GTIN: 4260497345213
Available, delivery time: 1-3 days
Magnet 6x3 mm for VNG mask cover for masks eVNG or EST-VNG
Magnet for the cover of the VNG mask of the systems eVNG, eHIT and EST-VNG from Biomed Jena. Special magnet for gluing into the cover. Dimensions: diameter 6 mm, height: 3 mmScope of delivery: 1 magnetevidENT-Shop Article 477
Available, delivery time: 1-3 days
Magnet 5x3 mm for mask body VNG for eVNG, eVNG/eHIT or EST-VNG
Spare part magnet for eVNG mask, eVNG/eHIT combination mask and EST-VNG system. For gluing into the mask body. The magnet in the mask body holds the cover of the mask in place. Dimensions: diameter: 5 mm, height: 3 mmevidENT-Shop Article 558
Available, delivery time: 1-3 days
Headgear for VNG and HIT masks Velcro strap
Replacement mask rubber (tape) for the masks of the VNG system eVNG, eHIT and eVNG/eHIT combination system from Biomed Jena. Also for EST-VNG masks. Also suitable for the VNG systems from Interacoustics: VN15, VN415, VO25, VO425 and the VNG system from MAICO. 2-part flexible rubber band. Fixation is by Velcro fasteners. The strap is easy to replace.Dimensions: width 3 cm, length 30 - 34 cmScope of delivery: 1 pieceevidENT-Shop Article 213GTIN: 4260585410564
Available, delivery time: 1-3 days
XL-Headband for eVNG and eVNG/eHIT Combimask for Vestubuar Systems
Extra-long mask strap for the masks of the VNG system eVNG, eHIT and eVNG/eHIT. Also suitable for VNG systems from Interacoustics and MAICO. Also suitable for EST VNG masks. 2-part flexible rubber band. Fixation with Velcro fasteners. The strap is easy to replace.Dimensions: width 3 cm, length 35 - 40 cmScope of delivery: 1 pieceevidENT-Shop Article 280GTIN: 4260585410557
Available, delivery time: 1-3 days
Mirror for eVNG and eHIT-Masks - left - new version
Left mirror for the eVNG mask, eVNG/eHIT mask of the manufacturer Biomed Jena. Also for use with EST-VNG masks with the serial number VEB04. Semi-permeable mirror for installation in a mask of the eVNG. A small Allen key is required to install the mirror.Scope of delivery: 1 mirrorevidENT-Shop Article 384For orientation: what is right- what left?Place the mirror with the holder on the table, the grid points upwards. The diagonally from bottom right to top left oriented mirror is the left one, the diagonally from bottom left to top right oriented mirror is the right one. Other method: put on the mask and look through it. Now the right mirror is on the right and the left mirror on the left.
Available, delivery time: 1-3 days
Mirror for eVNG and eHIT-Masks - right - new version
Right mirror for the eVNG mask, eVNG/eHIT mask of the manufacturer Biomed Jena. Also suitable for installation in EST-VNG masks with the serial number VEB04. Semi-permeable mirror for installation in a mask of the eVNG.A small Allen key is required to install the mirror.Scope of delivery: 1 mirrorevidENT-Shop Article 383For orientation: what is right- what left?Place the mirror with the holder on the table, the grid points upwards. The diagonally from bottom right to top left oriented mirror is the left one, the diagonally from bottom left to top right oriented mirror is the right one. Other method: put on the mask and look through it. Now the right mirror is on the right and the left mirror on the left.
Available, delivery time: 1-3 days
Face cushion "plus" for ICS Impulse
Face pad "plus" for ICS Impulse, comfortable version. Face pad type 2.Manufacturer GN Otometrics / Natus. 8-62-62300Scope of delivery: One package with 10 pads
Available, delivery time: 1-3 days
Face cushion type 1 for ICS Impulse
Face pad type1 for ICS Impulse. Patient side with plain surface.Face pad type 1.Manufacturer GN Otometrics / Natus 8-62-50200Scope of delivery: One package with 12 pads
Available, delivery time: 1-3 days
Vision Denied solution kit for ICS Impulse
Vision blocks for measurements with ICS Impulse 3.0, to be attached under the glasses. Please note that these are disposable items! Use new disposable vision blocks for each new patient. Disposable vision blocks must not be cleaned and reused. A pair of vision blocks consists of a black cover for one eye and an eye patch for the other eye. Natus item 8-62-50700. Scope of delivery: A bag with 10 pairs
Available, delivery time: 1-3 days
Headband for ICS Impulse
Headband for ICS ImpulseScope of delivery: One headband
Available, delivery time: 1-3 days
Hortmann cover for VideoCNG glasses with imprint for Type4211
Cover for VideoCNG glasses "Hortmann" (type 4211) by Otometrics. With imprint.Holds firmly by 2 magnets on the mask and closes it light-tight. Material: Plastic.We still have 1 of these covers in stock, after which they will no longer be available. Scope of delivery: 1 coverevidENT-Shop Article 299
Available, delivery time: 1-3 days
Two-piece mask frame for ICS VG40 VNG goggles from Natus GN Otometrics
Two-part mask frame for the blue ICS VG40 VNG mask from Natus GN Otometrics.Material: plastic.Scope of delivery: 1 mask frame, upper and lower part
Available in 4 days, delivery time 1-3 days
Face cushion for ICS VG40 VNG goggles from Natus GN Otometrics
Foam cushion for easy replacement for the blue ICS VG40 VNG mask from Natus GN Otometrics (Hortmann).Modified cushion with better fit.Scope of delivery: 1 pieceevidENT-Shop article 557Disinfection of the face pad: Please use alcohol pads (e.g. with 70 % isopropyl alcohol) to clean and disinfect the mask, especially the face pad. Replacing the face cushion: The face cushion should be replaced after prolonged use. It is easy to remove by pressing the pad inwards from the outside with your thumb. After you have done this at various points, the pad can be lifted out. When inserting the new cushion, please ensure that the inner and outer folds of the cushion are fully inserted into the existing grooves on the inside and outside.
Available, delivery time: 1-3 days
Replacement cable for ICS VG40 VNG mask from Natus GN Otometrics
Replacement cable for ICS VG40 VNG mask from Natus GN Otometrics (Hortmann).Cable with 9-pin D-sub connector. For installation by qualified service technicians.Scope of delivery: 1 cable
Available, delivery time: 1-3 days
Mirror kit assembly for ICS VG40 VNG goggles from Natus GN Otometrics
Replacement mirror set for the blue ICS VG40 VNG spectacles from Natus GN Otometrics (Hortmann).Scope of delivery: 1 mirror
Available, delivery time: 2-5 days
IR filter for ICS VG40 VNG goggles from Natus GN Otometrics
Infrared (IR) filter for the blue ICS VG40 VNG spectacles from Natus GN Otometrics (Hortmann).For sticking on.Scope of delivery: 1 set of IR filters
Available, delivery time: 1-3 days
Spectacle strap for VNG4000 for Homoth VNG
Spectacle strap for VNG4000 for Homoth VNG.Scope of delivery: 1 pieceevidENT-Shop 671
Available, delivery time: 1-3 days
Mirror for 2D VOG or VN15 mask - right side -
Mirror for 2D VOG or VN15 mask (right). Semi-permeable mirror for installation in a 2D VOG from SMI or VN15 mask from Interacoustics. Scope of delivery: 1 mirror right, without bracket!evidENT-Shop Article 207A small Allen key is required to install the mirror.
Available, delivery time: 1-3 days
Foam cushion box for VNG mask (24 pieces)
Foam padding for easy replacement of the VNG mask of the VN15, VN415, VO25, VO425 systems from Interacoustics. Also suitable for the MAICO VNG system.Scope of delivery: Box with 24 foam cushionsevidENT-Shop Article 202
Available, delivery time: 1-3 days
Blind cover for 2DVOG (SMI) and VNG (Interacoustics, MAICO)
Cover for the mask of the VNG system 2D VOG from SMI and VN15/VO25 from Interacoustics. Also suitable for MAICO's VNG system. The cover closes the side of the mask light-tight without a camera. Holds firmly through magnets. Shipment: 1 piece evidENT-Shop Artikel 69Manufacturer: InteracousticsItem no 66750
Available, delivery time: 1-3 days
Magnet 4x5mm for VNG mask cover
Magnets for 2D VOG or VN15 masks Magnet for fixing the hexagonal cover to the side of the 2D VOG or VN15 mask and for the mask cover.Suitable for 2D VOG systems from SMI (Sensomotoric Instruments, Berlin) and VN15 from Interacoustics.Dimensions: diameter: 4 mm, height: 5 mmScope of delivery: 1 magnetevidENT-Shop Article 203
Available, delivery time: 1-3 days
Magnet 6x5mm for mounting a VNG camera
Magnets for 2D VOG or VN15 cameras Magnet for attaching the camera to 2D VOG mask (SMI) or VN15 mask (Interacoustics)Dimensions: diameter: 6 mm, height: 5 mm Scope of delivery: 1 magnetevidENT-Shop Article 205
Available, delivery time: 1-3 days
Hose tips "short" for caloric irrigators HORTMANN Airmatic
Short tube tips for the Airmatic air calorimeter from HORTMANN. For single use. Material: Silicone. Note: For technical reasons traces of talcum may be present. Dimensions: length: 17 mm, outer diameter: 3.0 mm, inner diameter: 1.5 mmScope of delivery: one bag with 50 piecesevidENT-Shop Article 163
Available, delivery time: 1-3 days
Hose tips Airmatic Typ51 for air caloristat from HORTMANN
Hose tips for the Airmatic air calorimeter, Type 51 from HORTMANN. For single use. Material: Silicone. Note: For technical reasons traces of talcum may be present. Dimensions: length: 30 mm, outer diameter: 3.25 mm, inner diameter: 2.0 mmScope of delivery: one bag with 50 piecesevidENT-Shop Article 156
Available, delivery time: 1-3 days
Hose tips "large" forcaloristates for Hortmann Airmatic and H&Z
Extra-long hose tips for the Airmatic air calorimeter from HORTMANN. Also suitable for H&Z type Vptherm caloristat from Hörniß and Zeisberg. For single use. Silicone hose connector. Note: For technical reasons traces of talcum may be present. Dimensions: length: 30 mm, outer diameter: 2.75 mm, inner diameter: 1.0 mmScope of delivery: one bag with 50 piecesevidENT-Shop Article 164
Available, delivery time: 1-3 days
Rubber ear-tips for Homoth Aircalorisator
Original hose connector for air calorimeter from the manufacturer Homoth. Replaceable ear attachment for targeted caloric stimulation of the labyrinth via the outer auditory canal. Tube tips for single use. Note: contains traces of talcum. Dimensions: length: 25 mm, diameter: 4 mm, inner diameter: 3 mmScope of delivery: Bag with 100 piecesevidENT-Shop Article 459
Available, delivery time: 1-3 days
Hose connector for air caloristats Varioair from ATMOS
Silicone tubes, to be slipped on jet connection. Suitable for ATMOS Varioair and HORTMANN Wasserkaloristat Aquamatic. For single use. Hose nozzle made of transparent silicone. Note: For technical reasons traces of talcum may be present. GTIN: 4260585410601.Dimensions: length : 30 mm, inside diameter: 1.5 mm, total diameter: 3 mmScope of delivery: one bag with 30 piecesevidENT-Shop Article 153
Available, delivery time: 1-3 days
Hose tips for caloric irrigator for ATMOS Variotherm and Biomed KALORIstar
Tube tips for different caloristates: Air caloristat KALORIstar of the manufacturer BioMed. Also suitable for the following water caloristats: ATMOS Variotherm, Otometrics Aquamatic II, HORTMANN Aquamatic. For single use. Hose connector made of transparent silicone. Note: For technical reasons traces of talcum may be present. GTIN: 4260585410588.Dimensions: length: 30 mm, outer diameter: 3.5 mm, inner diameter: 2.5 mmScope of delivery: 30 piecesevidENT-Shop Article 154
Available, delivery time: 1-3 days
AquaStim water irrigator tips
Hose tips for the water caloristat AquaStim™ water irrigator by Interacoustics. For single use only. Hose nozzle made of silicone.Note: For production reasons, traces of talcum may be present.Scope of delivery: 50 pieceevidENT-Shop Article 707
Available, delivery time: 1-3 days
Air filter, Vyon G 1/4“ for air irrgigators Kaloristar, Varioair Airmatic
Replacement air filter Vyon G 1/4" for different air caloristats:- Varioair of the manufacturer ATMOS- Airmatic II from GN Otometrics.- KALORIstar and KALORIstar Arctic of the manufacturer BiomedThe filter can easily be replaced by the user.Scope of delivery: 1 pieceevidENT-Shop Article 165GTIN: 4260585410595
Available, delivery time: 1-3 days
Attachment nozzle/earpiece for air calorimeter KALORIstar Arctic
Earpiece for the hose supports for the air caloristat KALORIstar of the manufacturer Biomed. The cone serves as air outlet nozzle for the stimulation device for caloric testing. Material: plastic. Scope of delivery: 1 pieceevidENT-Shop Article 351
Available, delivery time: 1-3 days
Housing air outlet (black) for Kaloristar
Housing air outlet as spare part for KALORIstar (in the device; the earpiece no.: 62000061 is put on it)Colour: blackGTIN: 4260497345169Scope of delivery: 1 pieceevidENT-Shop Articlel 352
Available, delivery time: 1-3 days