Tympanometry
Impedance tube set for AT900 /AT1000
Set of three hoses for the AT900 or AT1000 tympanometer from the manufacturer Auritec. The set consists of: 2x tubing 0.8 mm x 2.4 mm (WD: 0.8mm) with a length of 30 cm each tubing 1x silicone hose 1mm x 3mm (length 30 cm)Scope of delivery: 1 set evidENT store article 910
Available, delivery time: 1-3 days
Probe for tympanometer eTYMP
Complete probe for tympanometer eTYMP USB from BioMed Jena GmbH Cable length: 170 cmOriginal article 027.00.10.002 Scope of delivery: one probe, completeevidENT-Shop Article 844
Available in 4 days, delivery time 1-3 days
Straight passive probe tip for BioMed eTYMP USB
Passive probe tip (straight) for the eTYMP USB from BioMed Jena GmbH.Original article 027.00.10.015GTIN: 4260497347163Scope of delivery: 1 probe tipevidENT Shop Article 846
Available, delivery time: 1-3 days
Angled passive probe tip for BioMed eTYMP USB
Passive probe tip (angled) for eTymp USB by Biomed Jena.Original article 027.00.10.016GTIN: 4260497347170 Scope of delivery: 1 probe tipevidENT Shop Article 847
Available, delivery time: 1-3 days
Tubing set for BioMed eTYMP USB probe
Connection tubes between probe and tympanometer eTYMP USB from BioMed Jena. Material: silicone. Original article 027.00.10.013GTIN: 4260497347149Scope of delivery: 1 set of 3 tubes of 15 cm each.evidENT Shop Article 849
Available, delivery time: 1-3 days
Testing cavity for eTYMP USB
Test cavity for eTYMP USB from Biomed Jena GmbH.Volume: 0.5 cm³, 1 cm³, 1 cm³ TST, 2 cm³, 5 cm³Original article 027.00.10.014 Scope of delivery: one cavityevidENT store Article 848
Available in 4 days, delivery time 1-3 days
Shoulder strap for tympanometer eTYMP USB
Shoulder strap for tympanometer eTymp from BioMed Jena GmbH. Weighted at both ends, the strap can be placed over the shoulder and the probe attached to it with Velcro.Length: approx. 50 cmWeight: 200 gOriginal article 027.00.10.012Scope of delivery: one beltevidENT store article 845
Available in 4 days, delivery time 1-3 days
Power supply for BioMed eTYMP device
Power supply for the eTYMP USB from BioMed Jena GmbH.Input: 100-240 VAC, 47-63 HzOutput: 152 VDC, max. 42 W Original article 027.00.10.009Scope of delivery: 1 power supply unitevidENT-Shop article 851Manufacturer: BioMed Jena GmbH, Germany.
Available, delivery time: 1-3 days
Probe cable for the GSI 39 tympanometer from Grason Stadler
Complete probe cable for the GSI 39 tympanometer from Grason Stadler.For installation by qualified service technicians.Length: 2.5 mScope of delivery: 1 cable
Available, delivery time: 1-3 days
Union cap for probe tip for tympanometer Interacoustics AT235 and similar
Union cap for fixing the probe tip of the tympanometer. For universal probes - production from 2003 (from device serial number 129000). For the devices Interacoustics AT235, AT235h, AA220, AA222 and the identical tympanometers KIND DI921 and SAT15 from Steinmeier AUDIOmed as well as tympanometers MAICO MI24, MI26 and MI34. Camplex KLT26.Note: Please note the corrugation of the union cap: The outside of the nut forms a hexagon.Scope of delivery: One pieceevidENT-Shop Article 77
Available, delivery time: 1-3 days
Probetip 050 for Tympanometer MAICO and Interacoustics
Replacement probe tip for tympanometer probes. For Interacoustics AT235, AT235h, AA220, AA222, tympanometer KIND DA921, Steinmeier AUDIOmed SAT15, and for the devices MAICO MI24, MI26, MI34 and Kamplex KLT26.The upper tip of the type probe is fixed by the locking ring. The probe tip can be used with all variants and versions of this probe type.Scope of delivery: One probe tipevidENT-Shop Article 227ATTENTION: When replacing the probe tip, please pay attention to the internal silicone probe filter (seal). It must be removed from the old probe tip, cleaned if necessary and then inserted into the new tip. If the probe filter is missing, impedance measurements are not possible.
Available, delivery time: 1-3 days
Transparent probe filter / seal for tympanometer probes
Replacement seal / probe filter for standard and universal probes. For the devices Interacoustics AT235, AT235h, AA220, AA222 and KIND DI921, as well as SAT15 from Steinmeier AUDIOmed. Also for the MAICO MI24 and MI34 devices. Material: Silicone.Clear, almost transparent seal with 4 holes and notch. Sits underneath the rotatable probe tip of the tympanometer. The seal can be used on all versions of this probe type. Scope of delivery: 1 pieceevidENT-Shop Article 310Please note: The seal is occasionally lost when cleaning the probe. A compliance measurement is then no longer possible. The device reports an error because the probe is not sealed.
Available, delivery time: 1-3 days
Silicone tubing (30 cm) for pump system for tympanometer AT235 and identically constructed
Silicone hose for the pump system of Interacoustics AT235, AA220, AA222 and KIND DI921 tympanometers. Also suitable for MAICO MI24, MI26 and MI34, Kamplex KLT26 and Steinmeier AUDIOmed SAT15.Dimensions: length: 30 cm, ID 1,00 mm, AD 3,0 mmScope of delivery: 1 tubeevidENT-Shop Article 225
Available in 4 days, delivery time 1-3 days
Tympanometer probe kit for Interacoustics AT235 from 2012
Set consisting of probe tip, union nut and seal. For Tympanometer AT235 (new from 2012). Also suitable for the combination units Interacoustics AA220 and AA222. When using the Sanibel earplugs. Scope of delivery: 1 set evidENT-Shop Article 142Valid for devices from SN 800411 Cap probe 1057Material of union nut and probe tip: grey plastic. Seal material: grey silicone; seal: transparent plastic. Probe kit consisting of probe tip, union nut and seal.
Available, delivery time: 1-3 days
Union nut for probe Tympanometer Interacoustics AT235 (from 2012)
Replacement union nut for tympanometer AT235 (new from 2012). Also suitable for Interacoustics AA220 and AA222. When using the Sanibel earplugs. Material grey plastic. Scope of delivery: 1 union nutevidENT-Shop Article 474Valid for devices from SN 800411. Cap probe 1057
Available, delivery time: 1-3 days
Probe tip Type1057 for probe Tympanometer Interacoustics AT235
Probe tip 1057. Transparent replacement probe tip for Interacoustics AT235 tympanometer (production from 2012). Also suitable for the Interacoustics AA220 and AA222 combination instruments. With 4 holes. For use with Elastosil earplugs. Material: transparent Kunstolff. Scope of delivery: 1 probe tipevidENT-Shop Article 201
Available, delivery time: 1-3 days
Filter seal Type1057 for probe Tympanometer Interacoustics AT235 (from 2012)
Replacement seal for the transparent probe tip for tympanometer AT235 (new from 2012). Also suitable for Interacoustics AA220 and AA222. With 4 holes. For use with Sanibel earplugs. Material: grey plastic. Please note: for correct impedance measurements the sealing washer is absolutely necessary! Scope of delivery: 1 gasket.evidENT-Shop Article 476Original number 34111201
Available, delivery time: 1-3 days
Probe tip kit (type 1077) for Tympanometer MAICO and Interacoustics
Replacement kit type 1077: probe tip and gasket for standard and clinical probes. Suitable for Interacoustics AT235, AT235h (Production from 2015). Fits also Interacoustics Titan new probe type 1055. Fits AT235™ or newer, AA222™, Sera™, Tympstar Pro™ Novus™ , easyScreen™, and touchTymp™, and new Titan (IOWA). Type 8502560.Compatible with: GSI Tympstar Pro, interacoustics Titan hardware improvements (probe/SB), interacoustics AT235/AT235h Blackline, interacoustics AT235/AT235h New, MAICO touchTymp, MAICO EasyScreen Beraphone, MAICO MB11 Beraphone, Grason-Stadler, AT235/AT235h Blackline, AT235/AT235h New, Titan hardware improvements (probe/SB), MAICO MB 11 BERAphone. The probe tip can be used with all versions of this probe type: 1043 / 1044 / 1077 / 1078. Material: plastic. Shipment: 1 pieceevidENT-Shop Article 181ATTENTION: Please take care for the inner silicone filter when replacing the probe tip.
Available, delivery time: 1-3 days
Union nut (Type1077) for tympanometer AT235/Titan (as from 2015)
Union nut for probe tip for tympanometer probes type 1077 . Interacoustics AT235 III, AT235h (production as of 2015). Also suitable for the new Titan 1055 probe as well as AA222™, Sera™, Tympstar Pro™ Novus™ , easyScreen™ and touchTymp™. Shipment: 1 pieceevidENT-Shop Article 831
Available, delivery time: 1-3 days
Tube for universal probe system for Tympanometer MAICO and Interacoustics
Silicone hose for the universal probes of the tympanometers of the manufacturers Interacoustics, KIND and MAICO. Interacoustics AT235, AA220, AA222. KIND DI921. MAICO Tymp MI34.Dimensions: length: 35 cm, ID 1,00 mm, AD 3,0 mmScope of delivery: 1 hoseevidENT-Shop Article 162
Available in 4 days, delivery time 1-3 days
Probetip for MT10new (from 2012) for Tympanometer Interacoustics
Replacement probe tip for Interacoustics MT10new tympanometer (production from 2012). Same construction as probe tip for tympanometer Amplivox Otowave 102-4. Amplivox Otowave 102, Amplivox Otowave 202, Amplivox Otowave 302, GSI Allegro, Interacoustics MT10 II, MedRx Otowave 102-4With 4 holes. For use with Elastosil earplugs. Material: transparent plastic.Scope of delivery: 1 probe tipevidENT-Shop Article 604Item nr. 8006525
Available, delivery time: 1-3 days
Pump tube complete for impedance audiometers
Spare part for pump systems of tympanometers. Suitable for Interacoustics AT22, AT2, AZ7, AZ26, AT235, AT235h, AA220, AA222, for Steinmeier AUDIO-MED SAT15 and SAT20, KIND DI921, Tympanometer MAICO MI24, MAICO MI26, MAICO MI34. Also suitable for eTYMP and Kamplex KT20. Material: natural rubber. Pump Tube Complete 050/052/053 spare part.Scope of delivery: One pump tubeevidENT-Shop Article 12
Available, delivery time: 1-3 days
Screws for handle of tympanometer MT10
Replacement screws for the handle for the MT10 tympanometer from Interacoustics and Kamplex KT20. 5 screws are required to attach the handle.Material: steel. A Torx T6 screwdriver is required.Scope of delivery: Set with 5 screwsevidENT-Shop Article 563
Available, delivery time: 1-3 days
Probe tip Version 1 and 3 forTympanometer Interacoustics MT10
Probe tip for the handheld tympanometer MT10 from Interacoustics, version 1 and 3 and tympanometer Kamplex KT20. Material: plastic. Scope of delivery: One probe tipevidENT-Shop Article 82
Available, delivery time: 1-3 days
Silicone Tube for Interacoustics MT10
Replacement silicone hose for the pump system of the devices MTS10 and MTP10 from Interacoustics and Kamplex KT20.Dimensions: length: 12 cm, width: 1,00, height: 1,00 mmScope of delivery: 1 tubeevidENT-Shop Article 252
Available, delivery time: 1-3 days
NiMH Battery Varta Type VH1800AA for Interacoustics Tympanometer MT10
Replacement NiMH battery 1800AA for the MT10 tympanometer from Interacoustics and Kamplex KT20. For the tympanometer MT10 3 rechargeable batteries are required.Technical data: voltage 1.2 V, capacity 1800 mAH, diameter 14.5 mm, height 49.1 mmScope of delivery: One pieceevidENT-Shop Article 80
Available, delivery time: 1-3 days
Probe Tip for Interacoustics Titan and MAICO easyTymp
Replacement probe tip for Tympanometer Interacoustics Titan, as well as MAICO EasyTympColour: transparent. For use with Elastosil earplugs.Probe type 1055, 3 mmScope of delivery: 1 pieceevidENT-Shop Article 386Original No. 8001701
Available, delivery time: 1-3 days
Probe cap (Probe cab) for Interacoustics Titan and MAICO easyTymp
Nut / cap for probe tip for tympanometer Type 1055 Titan of the manufacturer Interacoustics. Also suitable for tympanometer Easy Tymp of the manufacturer MAICO.Scope of delivery: 1 pieceevidENT-Shop Article 389
Available, delivery time: 1-3 days
Gasket for Tymppanometer MAICO EasyTymp and Interacoustics Titan
Replacement seal for the probe tip for tympanometer Interacoustics Titanium and the MAICO EasyTymp Colour: black. For use with Elastosil earplugs. Probe type 1055. Scope of delivery: 1 pieceevidENT-Shop Article 654
Available, delivery time: 1-3 days
Short extension cable for Interacoustics Tympanometer Titan
Probe cable extension for Tympanometer Titan from the manufacturer Interacoustics.Length: 35 cm. Cable between probe and device. Original No. 8004252Scope of delivery: 1 probe cable extension
Available, delivery time: 1-3 days
Battery lithium 3.6 V for Titan Tympanometer
Lithium battery 3.7 V, 1800 mAh for the Titan Impedance Audiometer from Interacoustics. Original no. 74101501Scope of delivery: 1 piece evidENT shop Article 130
Available, delivery time: 1-3 days
Inventis tympanometers probe tip
Replacement probe tip for Inventis Timpani tympanometer. Material: metal. Supplied without union nut.Scope of delivery: 1 piece evidENT store article 104
Available, delivery time: 1-3 days
Inventis tympanometers tube
Silicone tube for installation inside, for Inventis Timpani tympanometer. Material: silicone. Dimensions: length: 14.5 cm, inner diameter: 1.00 mm.Scope of delivery: 1 pieceevidENT-Shop Article 901
Available in 4 days, delivery time 1-3 days
Inventis tympanometers probe gasket
Replacement probe gasket for Inventis tympanometer e.g. Timpani. Material: silicon. Inventis item 10583.Scope of delivery: 1 pieceevidENT-Shop Article 902
Available, delivery time: 1-3 days
Service mechanical probe tip for r26m and r36m
Grey probe tip for the standard probes for the Tympanometer MRS Resonance. Suitable for the tympanometers r26m, r36m. Material: metalType MY2016. Original number S6000146. Scope of delivery 1 pieceevidENT Shop Article 084
Available, delivery time: 1-3 days
Inner probe tip for Tymp R26M from MRS Resonance
Inner metal probe tip for MRS Resonance tympanometer. Service hard temper R35 probe MY2016. MRS No. S6000155Suitable for the r26m, r36m tympanometers. Please note: The rubber seal (O-ring) is not included in the delivery!Scope of delivery 1 piece
Available in 4 days, delivery time 1-3 days