Radioear B71/B81 Bone Transducer
Headphones B71 (10 Ohm) with transducer, headband, cable
Complete replacement bone conduction receiver B71W from RadioEar with transducer, cable and headband. Cable with gold-plated 6.3 mm jack plug.Resistance: 10 Ohm.RadioEar Nr. P1012 (Item #8510370)Scope of supply: bone conduction headphones, cable, headbandevidENT-Shop Article 63Since its introduction in the 1970s, the RadioEar B71 bone conduction receiver has been the first choice for audiometric testing.Please note that when replacing the headphones, the audiometer should be recalibrated.
Available in 4 days, delivery time 1-3 days
B71 Bone Transducer from RadioEar (10 Ohm)
B71 Bone Transducer from RadioEar. Type: B71W, ROHS compliant. The long established benchmark of bone conduction performance. The B71 is handmade and hand assembled to consistently perform to an exacting standard. The B71W is identical in all aspects of the original B71 with regards to performance and materials except it does not contain lead. It was developed in response to RoHS directive 2011/65/EU. Technical data:- Impedance 10 ohms @ 1KHz- Frequency Response: 250-4000 Hz- Max Input Voltage: 20 dB re 1.0mW- Biocompatibility: no biological effects as per ISO 10993-1:2009- Weight: 24g (0.846 oz)- Connector: receptacle for Type 31 plugRadioEar Nr. P1001 (Item #8506731) Package content: 1 bone transducer evidENT-Shop Article 64Please note that the audiometer must be recalibrated when replacing the headphones.
Available in 30 days, delivery time 1-3 days
B71 Bone Transducer from RadioEar (50 Ohm)
B71 Bone Transducer from RadioEar. Type: B71W, ROHS compliant. The long established benchmark of bone conduction performance. The B71 is handmade and hand assembled to consistently perform to an exacting standard. The B71W is identical in all aspects of the original B71 with regards to performance and materials except it does not contain lead. It was developed in response to RoHS directive 2011/65/EU. Technical data:- Impedance 50 ohms @ 1KHz- Frequency Response: 250-4000 Hz- Max Input Voltage: 20 dB re 1.0mW- Biocompatibility: no biological effects as per ISO 10993-1:2009- Weight: 24g (0.846 oz)- Connector: receptacle for Type 31 plugRadioEar Nr. P1002 (Item #8506732) Package content: 1 bone transducer evidENT-Shop Article 814Please note that the audiometer must be recalibrated when replacing the headphones.
Available in 14 days, delivery time 1-3 days
B71 Bone Transducer from RadioEar (150 Ohm)
B71 Bone Transducer from RadioEar. Type: B71W, ROHS compliant. The long established benchmark of bone conduction performance. The B71 is handmade and hand assembled to consistently perform to an exacting standard. The B71W is identical in all aspects of the original B71 with regards to performance and materials except it does not contain lead. It was developed in response to RoHS directive 2011/65/EU. Technical data:- Impedance 150 ohms @ 1KHz- Frequency Response: 250-4000 Hz- Max Input Voltage: 20 dB re 1.0mW- Biocompatibility: no biological effects as per ISO 10993-1:2009- Weight: 24g (0.846 oz)- Connector: receptacle for Type 31 plugRadioEar Nr. P1005 (Item #8506735) Package content: 1 bone transducer evidENT-Shop Article 815Please note that the audiometer must be recalibrated when replacing the headphones.
Available in 14 days, delivery time 1-3 days
B71 Bone Transducer from RadioEar (300 Ohm)
B71 Bone Transducer from RadioEar. Type: B71W, ROHS compliant. The long established benchmark of bone conduction performance. The B71 is handmade and hand assembled to consistently perform to an exacting standard. The B71W is identical in all aspects of the original B71 with regards to performance and materials except it does not contain lead. It was developed in response to RoHS directive 2011/65/EU. Technical data:- Impedance 300 ohms @ 1KHz- Frequency Response: 250-4000 Hz- Max Input Voltage: 20 dB re 1.0mW- Biocompatibility: no biological effects as per ISO 10993-1:2009- Weight: 24g (0.846 oz)- Connector: receptacle for Type 31 plugRadioEar Nr. P1006 (Item #8506736) Package content: 1 bone transducer evidENT-Shop Article 816Please note that the audiometer must be recalibrated when replacing the headphones.
Available in 14 days, delivery time 1-3 days
Headphones B81 complete with transducer, headband and cable
New bone conduction earphone B81 from Radioear. Type P2011. High maximum output, low distortion, very robust design.Complete with headband and cable with 6.3mm jack plug. RoHS compliant. RadioEar's new and improved bone conductor features lower distortion and higher output power at lower frequencies.Technical data:- Converter resistance: 12.5 Ohm. - Transducer dimensions: height: 16 mm, length: 31.7 mm, height: 18.2 mm- Weight: 20 g- Sensitivity: 119 dB re.1 µN @ 1 Vrms & 1 kHz- Absolute harmonic distortion: 1.1% @ 1 Vrms & 1 kHz- Resistance: 12.5 ohm @ 1 kHz; safety plug. RoHS complianceScope of delivery: Headphones B81 completeevidENT-Shop Article 556Please note that the audiometer should be recalibrated when replacing the headphones.
Available in 4 days, delivery time 1-3 days
Single B81 Bone Conductor (12.5 Ohm)
Bone conduction receiver B81 from RadioEar. Converter resistance 12.5 Ohm. High maximum power, low distortion, very robust product.Technical data:- Case dimensions: Height: 16 mm, length: 31.7 mm, - Weight: 18.2 mm- Sensitivity: 119 dB re.1 µN @ 1 Vrms & 1 kHz- Total harmonic distortion: 1.1% at 1 Veff & 1 kHz- Impedance: 12.5 Ohm at 1 kHz- Secured connector concept- RoHS ConformityRadioEar Nr. P2001 (Item #8506737)Scope of delivery: 1 pieceevidENT-Shop Article 561Please note that the audiometer should be recalibrated when replacing the headphones.
Available, delivery time: 1-3 days
Headband for B71, B72, B71W, B81 Bone conduction headphones from Radioear
Spare headband for RadioEar bone conduction headphones. Article P3333. Suitable for types B71, B72, B71W, B81. Material: metal and plastic. The headband is easy to change without tools. The headband can only be disinfected with isopropyl alcohol. If necessary, sterilization with ethylene oxide. GTIN (01) 05711117219470Scope of delivery: One pieceevidENT-Shop Article 66
Available, delivery time: 1-3 days
Covered Headband for Radioear B71, B72, B71W, B81.
Replacement headband type P3333C for RadioEar bone conduction headphones. Suitable for types B71, B72, B71W, B81. The earpiece is covered with black plastic. The headband is easy to replace without tools. The headband can only be disinfected with isopropyl alcohol. If necessary, sterilization with ethylene oxide. Scope of delivery: One pieceevidENT-Shop Article 327
Available, delivery time: 1-3 days
Pads for Headband for B71, B72, B71W, B81 Bone conduction headphones from Radioear
Replacement ear pads for the headband for the bone conduction headset from RadioEar. The ear pads are suitable for the types B71, B72, B71W, B81. Material: foam rubber, colour black, adhesive on one side. Radioear type P3288-1. Scope of delivery: PU with 10 pads.evidENT shop Article 260
Available, delivery time: 1-3 days
AMBAND Elastic Headband for headphoens B71 and B81
RadioEar's new elastic headband enables precise bone conduction testing on different head sizes. Due to its flexibility, the band for audiometry with the Radioear B71 or Radioear B81 bone conductors offers a solution for bone conduction measurements in infants and children as well as adults.This headband is a disposable item and is not intended for multiple use. Shipment: The AMBAND is sold in packs of ten.evidENT-Shop Article 194Original-Article Radioear P1188
Available, delivery time: 1-3 days
Molded cord for Radioear B71, 6.3 mm jack
Replacement cable for the bone conductor B71 and B71W from RadioEar. Cable plug with green plastic, with gold-plated 6.3 mm mono jack plug. The cable is easy to replace without tools. Dimensions: length: 200 cm / 79".Radioear Nr. P3028 (Item #8508473)Scope of delivery: 1 cableevidENT-Shop Article 655
Available, delivery time: 1-3 days
Molded cord for Radioear B71, 6.3 mm stereo jack, for devices from MRS Resonance
Stereo replacement cable the bone conduction headphones B71W of the old type with 2 plugs!For audiometer from MRS: Suitable for audiometers R17A, R27A, R37A as well as R25C and R35C. With 6.3 mm STEREO jack plug, gold-plated. The cable is easy to replace without tools.Dimensions: Cable length: 183 cmScope of delivery: 1 cableevidENT-Shop Article 717
Available, delivery time: 1-3 days
Cord for Radioear B71, without plug
Replacement cord for the B71 bone conductor from RadioEar.Cable on unit side without plug, with open strands.Dimensions: Cable length: 200 cm/79"RadioEar Nr.: P3027 (Item: #8507193)Scope of delivery: 1 cable evidENT-Shop Article 824
Available, delivery time: 1-3 days
Cable for Radioear B71 and B-81, new type, 6.3 mm jack
New type replacement cable for the bone conductor B71 and B81 from RadioEar. For B71 transducers from year of manufacture 2019. Radioear Type P3082. Cable with 3-pin connector (type 3.1), green plastic marking, device side with gold-plated 6.3 mm mono jack plug, angled 30°. Dimensions: Cable length: 200 cm / 79"RadioEar Nr.: P3082 (Item: #8107612)Scope of delivery: 1 cableevidENT-Shop Article 699
Available, delivery time: 1-3 days
Molded cord for Radioear B71 and B-81, new type, 6.3 mm jack straight
New type replacement cable for the bone conductor B71 and B81 from RadioEar. Cable with 3-pin plug (type 3.1), green, device side with gold-plated 6.3 mm mono jack plug, straight. Dimensions: Cable length: 200 cm/79"RadioEar Nr.: P3083 (Item: #8103211)Scope of delivery: 1 cable evidENT-Shop Article 821
Available, delivery time: 1-3 days
Long bone conductor cable for Radioear B71 and B81, new type, 6.3 mm jack straight
New type replacement cable for the bone conductor B71 and B81 from RadioEar. Ortofon Variant. Cable with 3-pin plug (type 3.1), black, device side with gold-plated 6.3 mm mono jack plug, straight. Dimensions: Cable length: 285 cm/112"RadioEar Nr.: P30181A (Item: #8507183)Scope of delivery: 1 cable evidENT-Shop Article 562
Available in 4 days, delivery time 1-3 days
Extra long cable for Radioear B71 and B81, new type, 6.3 mm jack angled
New type replacement cable for the bone conductor B71 and B81 from RadioEar. For B71W transducer from year of manufacture 2019. Cable with 3-pin plug (type 3.1), green plastic marking, device side with gold-plated 6.3 mm mono jack plug, angled 30°. Dimensions: Cable length: 500 cmScope of delivery: 1 cable
Available, delivery time: 1-3 days
Cord for Radioear B71 and B-81, new type, 6,3 mm stereo jack
New type replacement cable for the bone conductor B71 and B81 from RadioEar. Cable with 3-pin plug (type 3.1), black, device side with gold-plated 6,3 mm stereo jack plug, straight. Dimensions: Cable length: 200 cm/79"Scope of delivery: 1 cable evidENT-Shop Article 963
Available, delivery time: 1-3 days
Cord for Radioear B71 and B-81, new type, 3.5 mm stereo jack
New type replacement cable for the bone conductor B71 and B81 from RadioEar. Cable with 3-pin plug (type 3.1), black, device side with gold-plated 3.5 mm stereo jack plug, 90° angled. Dimensions: Cable length: 200 cm/79"RadioEar Nr.: P3086 (Item: #8103211)Scope of delivery: 1 cable evidENT-Shop Article 822
Available, delivery time: 1-3 days
Molded cord for Radioear B71 and B-81, new type, without plug
New type replacement cable for the bone conductor B71 and B81 from RadioEar. Molded cord with 3-pin plug (type 3.1), without plug on unit side, with open strands.Dimensions: Cable length: 200 cm/79"RadioEar Nr.: P3085 (Item: #8515712)Scope of delivery: 1 cable evidENT-Shop Article 823
Available, delivery time: 1-3 days
Cable extension for B71/B81 cables
High-quality cable extension for the B71 and B81 headphones. Technical data:- Cable length: 2 meters- Bushes: 1 x lockable straight bush couplings with kink protection and metal housing (6.35 mm) - Plug: 1 x 6.35 mm jack audio connectors with metal housing and gold-plated contactsScope of delivery: 1 pieceevidENT-Shop Article 140
Available in 4 days, delivery time 1-3 days
B71W Bone Transducer for MRS Audiometer with 6.3 mm STEREO jack plug
Complete replacement bone conduction receiver B71W for audiometer by MRS. Suitable for R17A, R27A, R37A, R25C and R35C audiometers. Resistance 10 Ohm.Please note that the audiometer should be recalibrated when replacing the headphones.Scope of delivery: headphones with transducer, cable with straight 6.3mm stereo plug and headbandevidENT-Shop Article 718
Available in 4 days, delivery time 1-3 days