Radioear DD45, DD65 and DD450
Headphones DD45 (10 Ohm) complete with cables
Complete DD45 audiometric headphones.Suitable for audiometers made by Interacoustics, MAICO, MRS Resonance. Technical data :- Converter principle: Dynamic- Functional principle: Closed - Transmission range: 100 - 8000 Hz- Nominal impedance: 10 Ohm- Continuous power: 300mW, from 100 to 8000 Hz - contact pressure: 4,5N +/- 0,5N - Linearity: from 0 to 500 mW- Characteristic sound pressure level: 106.7 dB, distortion factor: less than 1%.- Frequency range: 20 - 12 000 Hz- Type of ear coupling: Ear Scope of delivery: Headphones with headband, headband pad, receiver pad and cable with 2 x mono jack plug 6.3 mmevidENT-Shop Article 485Please note: after replacing the headphones, the audiometer must be recalibrated.
Available in 4 days, delivery time 1-3 days
Headphones DD45 (10 Ohm) complete with cables
Complete audiometry headphones DD45 headband HB7, ear pad and cable with 2 x mono jack plug 6.3 mm.Suitable for audiometers of the manufacturers Interacoustics, MAICO, MRS Resonance. Original spare part for MERZ Audio.Technical data :- Converter principle: Dynamic- Functional principle: Closed - Transmission range: 100 - 8000 Hz- Nominal impedance: 10 Ohm- Continuous power: 300mW, from 100 to 8000 Hz - contact pressure: 4,5N +/- 0,5N - Linearity: from 0 to 500 mW- Characteristic sound pressure level: 106.7 dB, distortion factor: less than 1%.- Frequency range: 20 - 12 000 Hz- Type of ear coupling: Ear Headphones with headband HB7, cable with 2 x mono jack plug 6.3 mm angled.evidENT-Shop Article 826Please note: after replacing the headphones, the audiometer must be recalibrated.
Available in 4 days, delivery time 1-3 days
Shielded DD45 Audiometric Headphone for ABR
DD45 audiometric headphones with P4421S shielded converters (10 Ohm).Suitable for ERA measurements, e.g. with Eclipse from Interacoustics. Technical data:- Converter principle: Dynamic- Working principle: Closed- Transmission range: 100 - 8000 Hz- Nominal impedance: 10 Ohm- Application force: 4.5N +/- 0.5 N +/- 0.5 N- Linearity: Linear up to 500mW- Sensitivity: Typically 106.7 dB SPL re. 20 µPa output with 1 mW input, f= 1 kHz- Harmonic distortion: Less than 1 % at 120 db SPL, f=1 kHz- Weight: 410 grams (0.9 lbs)- Connection cable: IEC-M41 double earphone cable 200 cm (6.5 ft)- Cable plug: 6.3 mm red and blue ¼ inch jack plug- Environment: RoHS-compatible - Led and nickel-free - Biocompatible- Type of coupling to the ear: Overlying the earScope of delivery: Headphones with headband, headband padding, receiver padding and cable with 2 x mono jack plug 6.3 mmevidENT-Shop Article 630
Available in 4 days, delivery time 1-3 days
Contra Headset DD45C for MAICO, Interacoustics, MRS
Complete supra-aural DD45C (10 Ohm) double receiver with cable, headband and foam rubber padding. Suitable for tympanometers made by Interacoustics, MAICO, MRS and others. Connection cable with 1 x 6.3 mm jack plug.Technical data:- Type: Closed- Cable length: 200 cm- Transducer principle: Dynamic, Operating principle: Closed- Transmission range: 100 - 8000 Hz, nominal impedance: 10 O- Characteristic sound pressure level: 106.7 dB, distortion factor: less than 1%.- Type of coupling to the ear: Overlying the ear Scope of delivery: 1 headphone evidENT-Shop Article 489
Available in 4 days, delivery time 1-3 days
Radioear DD65 v2 audiometric headphones, 2x 6.3 mono jack angled, with sound-absorbing Peltor caps
Radioear's DD65 v2 with sound-absorbing Peltor caps is a circumaural headphone for audiometric tests in the standard audiometric range of 125 Hz - 8 kHz. Type P4810. It is a renewal of the classic Peltor-based audiometric headphones. One of the most important improvements is the precision in the repeatability of threshold tests, which is now at the same level as the RadioEar DD450. The DD65 v2 offers excellent passive attenuation and features a padded, adjustable soft headband with interchangeable circumaural ear cushions. It includes an extremely durable cable with TINSEL core and gold-plated 6.3 mm jack sockets.Technical data:- Transducer principle: Dynamic- Working principle: Closed- Transmission range: 100 Hz - 8 kHz- Nominal impedance: 10 Ohm- Type of coupling to the ear: Overlying the ear- Sensitivity: 98 dB SPL at 1 kHz, 1 mW, distortion: < 1% at THD- Max. Continuous power: 500 mW, - Contact pressure: 10 N ±0.5N- Weight: 330 gr (12 oz) - Cable connection: 2 x 6.3 mm mono jack plug, 30° angled- Cable length: 2500 mm- RoHS compatible - lead- and nickel-free- dimensions: 19.1 x 9.3 x 13.4 cmRadioEar Nr. P4810 (Item #8520328)Scope of delivery: headphones with 2 transducers, sound-absorbing caps with ear cushions and cable with 2 x 6.3 mm mono jack plug, 30° angledevidENT-Shop Article 786Please note that the audiometer must be recalibrated after changing the headphones!
Available, delivery time: 1-3 days
Radioear DD65 v2 audiometric headphones, 2x 6.3 mono jack straight, with sound-absorbing Peltor caps
Radioear's DD65 v2 with sound-absorbing Peltor caps is a circumaural headphone for audiometric tests in the standard audiometric range of 125 Hz - 8 kHz. Type P4811 It is a renewal of the classic Peltor-based audiometric headphones. One of the most important improvements is the precision in the repeatability of threshold tests, which is now at the same level as the RadioEar DD450. The DD65 v2 offers excellent passive attenuation and features a padded, adjustable soft headband with interchangeable circumaural ear cushions. It includes an extremely durable cable with TINSEL core and gold-plated 6.3 mm jack sockets.Technical data:- Transducer principle: Dynamic- Working principle: Closed- Transmission range: 100 Hz - 8 kHz- Nominal impedance: 10 Ohm- Type of coupling to the ear: Overlying the ear- Sensitivity: 98 dB SPL at 1 kHz, 1 mW, distortion: < 1% at THD- Max. Continuous power: 500 mW, - Contact pressure: 10 N ±0.5N- Weight: 330 gr (12 oz) - Cable connection: 2 x 6.3 mm mono jack plug, straight- Cable length: 2500 mm- RoHS compatible - lead- and nickel-free- dimensions: 19.1 x 9.3 x 13.4 cmRadioEar Nr. P4811 (Item #8520330)Scope of delivery: headphones with 2 transducers, sound-absorbing caps with ear cushions and cable with 2 x 6.3 mm mono jack plug, straightevidENT-Shop Article 817Please note that the audiometer must be recalibrated after changing the headphones!
Available, delivery time: 1-3 days
Radioear DD65 v2 audiometric headphones, 1 x 3.5 mm stereo mini jack, straight, with sound-absorbing Peltor caps
Radioear's DD65 v2 with sound-absorbing Peltor caps is a circumaural headphone for audiometric tests in the standard audiometric range of 125 Hz - 8 kHz. Type P4812 It is a renewal of the classic Peltor-based audiometric headphones. One of the most important improvements is the precision in the repeatability of threshold tests, which is now at the same level as the RadioEar DD450. The DD65 v2 offers excellent passive attenuation and features a padded, adjustable soft headband with interchangeable circumaural ear cushions. It includes an extremely durable cable with TINSEL core and gold-plated 3,5 mm jack sockets.Technical data:- Transducer principle: Dynamic- Working principle: Closed- Transmission range: 100 Hz - 8 kHz- Nominal impedance: 10 Ohm- Type of coupling to the ear: Overlying the ear- Sensitivity: 98 dB SPL at 1 kHz, 1 mW, distortion: < 1% at THD- Max. Continuous power: 500 mW, - Contact pressure: 10 N ±0.5N- Weight: 330 gr (12 oz) - Cable connection: 1 x 3.5 mm stereo mini jack, straight- Cable length: 2500 mm- RoHS compatible - lead- and nickel-free- dimensions: 19.1 x 9.3 x 13.4 cmRadioEar Nr. P4812 (Item #8520327)Scope of delivery: headphones with 2 transducers, sound-absorbing caps with ear cushions and cable with 1 x 3.5 mm stereo mini jack, straightevidENT-Shop Article 818Please note that the audiometer must be recalibrated after changing the headphones!
Available, delivery time: 1-3 days
Radioear DD65 v2 audiometric headphones, 1 x 3.5 mm stereo mini jack, angled, with sound-absorbing Peltor caps
Radioear's DD65 v2 with sound-absorbing Peltor caps is a circumaural headphone for audiometric tests in the standard audiometric range of 125 Hz - 8 kHz. Type P4813 It is a renewal of the classic Peltor-based audiometric headphones. One of the most important improvements is the precision in the repeatability of threshold tests, which is now at the same level as the RadioEar DD450. The DD65 v2 offers excellent passive attenuation and features a padded, adjustable soft headband with interchangeable circumaural ear cushions. It includes an extremely durable cable with TINSEL core and gold-plated 3,5 mm jack sockets.Technical data:- Transducer principle: Dynamic- Working principle: Closed- Transmission range: 100 Hz - 8 kHz- Nominal impedance: 10 Ohm- Type of coupling to the ear: Overlying the ear- Sensitivity: 98 dB SPL at 1 kHz, 1 mW, distortion: < 1% at THD- Max. Continuous power: 500 mW, - Contact pressure: 10 N ±0.5N- Weight: 330 gr (12 oz) - Cable connection: 1 x 3.5 mm stereo mini jack, angled 90°- Cable length: 2500 mm- RoHS compatible - lead- and nickel-free- dimensions: 19.1 x 9.3 x 13.4 cmRadioEar Nr. P4813 (Item #8520331)Scope of delivery: headphones with 2 transducers, sound-absorbing caps with ear cushions and cable with 1 x 3.5 mm stereo mini jack, angled 90°evidENT-Shop Article 819Please note that the audiometer must be recalibrated after changing the headphones!
Available in 4 days, delivery time 1-3 days
DD450 High Frequency Headset with Peltor Exclosures
Radioear's DD450 circumaural tweeter headphones can be used for audiometric testing in the standard 125 Hz - 8 kHz audiometric range and for high frequency testing up to 20 kHz. The DD450 headphones comply with IEC-60645-1 and ANSI S3.6 to 16 kHz. DD450 offers excellent passive attenuation, a padded, adjustable, soft headband and replaceable ear cushions. Includes high-resistance cable with TINSEL core, gold-plated 6.3 mm jack sockets. Type P6010.Technical data:- Transducer principle: Dynamic- Working principle: Closed- Transmission range: 20 Hz - 20 kHz- Nominal impedance according to IEC 60268-7: 14 Ohm- Type of coupling to the ear: Overlying the ear- Sensitivity: 100 dB SPL at 1 kHz, 1 mW, distortion: < 1% at THD- Max. Continuous power: 500 mW, - Contact pressure: 10 N ±0.5N- Weight: 330 gr (12 oz) - Cable connection: 2 x mono jack plugs- Cable length: 2500 mm- RoHS compatible - lead- and nickel-free- dimensions: 19.1 x 9.3 x 13.4 cmScope of delivery: headphones with 2 transducers, sound-absorbing caps with ear cushions and cable with 2 x 6.3 mm jack plugs (angled 30 degrees)evidENT-Shop Article 632Please note that the audiometer must be recalibrated after changing the headphones!
Available, delivery time: 1-3 days
Radioear DD45AA Audiometry Headphones, 2x 6.3 mono jack, with Amplivox caps
Radioear's DD45AA with sound-absorbing Amplivox caps is a DD45/TDH39 circumaural headphone for audiometric testing in the standard audiometric range of 125 Hz - 8 kHz. It is a renewal of the classic Peltor-based audiometric headphones. One of the most important improvements is the precision in the repeatability of threshold tests, which is now at the same level as the RadioEar DD450. The DD65 v2 offers excellent passive attenuation and features a padded, adjustable soft headband with interchangeable circumaural ear cushions. It includes an extremely durable cable with TINSEL core and gold-plated 6.3 mm jack sockets.Technical data:- Transducer principle: Dynamic- Working principle: Closed- Transmission range: 100 Hz - 8 kHz- Nominal impedance: 10 Ohm- Type of coupling to the ear: Overlying the ear- Sensitivity: 98 dB SPL at 1 kHz, 1 mW, distortion: < 1% at THD- Max. Continuous power: 500 mW, - Contact pressure: 10 N ±0.5N- Cable connection: 2 x 6.3 mm mono jack plug, 30° angled- Cable length: 2000 mm- RoHS compatible - lead- and nickel-freeRadioEar Nr. P4900 (Item #8010901)Scope of delivery: Headphones with 2 transducers, sound-insulating Amplivox caps with ear pads and cable with 2 x 6.3 mm jack plugs (angled at 30 degrees)evidENT-Shop Article 825Please note that the audiometer must be recalibrated after changing the headphones!
Available in 4 days, delivery time 1-3 days
Transducer for Headphones Radioear DD45
Replacement capsule Model DD45 for the headphone DD45. For use with Interacoustics, MAICO, MRS Resonance audiometers. Original spare part from Radioear. Type 4421Technical data: - Resistance 10 Ohm.- Standards: ANSI S3.6-2010, ISO389-1 1998- Headphone receiver: Dynamic voice coil specially developed for audiometry- Rated impedance: 10 Ohm; Frequency range: 100 Hz - 8 kHz- Linearity: Linear up to 500mW- Sensitivity: Typically 106.7 dB SPL re. 20 µPa output with 1 mW input, f= 1 kHz- Harmonic distortion: Less than 1 % at 120 db SPL, f=1 kHz- Weight: 59 gram (2 oz)- Cable plug: 2 clamps with 4 mm holes and 2 mm screw- Environmentally conscious: RoHS-compliant (lead- and nickel-free, biocompatible)Scope of delivery: One pieceevidENT-Shop Article 573
Available, delivery time: 1-3 days
Shielded DD45 10 Ohm Transducer, audiometric earphone P4421S
Model P4421S shielded capsule for DD45 headphones (10 Ohm). For use with ERA measurements, e.g. Eclipse from Interacoustics. Technical data: - Standards: ANSI S3.6-2010, ISO389-1 1998- Headphone receiver: Dynamic voice coil specially developed for audiometry- Nominal impedance: 10 Ohm- Frequency range: 100 Hz - 8 kHz- Linearity: Linear up to 500mW- Sensitivity: Typically 106.7 dB SPL re. 20 µPa output with 1 mW input, f= 1 kHz- Harmonic distortion: Less than 1 % at 120 db SPL, f=1 kHz- Weight: 59 gram (2 oz)- Cable plug: 2 clamps with 4 mm holes, 2 mm screw- Environment: RoHS compliant (lead and nickel free, biocompatible)Scope of delivery: 1 pieceevidENT-Shop Article 629Original spare part from Radioear
Available, delivery time: 1-3 days
Headband HB3045 for air conduction headphones Radioear DD45
Adult headband for air conduction headphones DD45. Type HB3045. Easily adjustable, softly padded headband. Excellent quality, robust design, easy handling and cleaning.Technical data: - Contact pressure: 4.5 N ±0.5N- Total weight: 165 grams- Dimensions: width: 20 cm, height: 16 cmScope of delivery: 1 pieceevidENT-Shop Article 628
Available, delivery time: 1-3 days
Pediatric Easy AdjustHeadband HB3100 for Radioear DD45
Headband for children for air conduction receiver DD45. Type HB3100 from Radioear . Easily adjustable, softly padded headband. Excellent quality, robust design, easy handling and cleaning. Technical data: - Contact pressure: 10 N ±0.5N- Total weight: 165 grams- Dimensions: width: 20 cm, height: 16 cmScope of delivery: 1 pieceevidENT-Shop Article 631
Available, delivery time: 1-3 days
Headband HBA for headphones DD45, foldable
Foldable replacement headband for headphones DD45. Suitable for audiometers from MAICO, Interacoustics, MRS Resonance, GSI. The headband can be easily replaced.Scope of delivery: Complete headband with head cushionevidENT-Shop Article 486
Available, delivery time: 1-3 days
DD45 Contra Headband for Tympanometer
Replacement headband with head cushion for contraphones CIR55. Headphone type DD45. HB3045C. For the contraphones for the tympanometers Titan and AT235 new from Interacoustics, also suitable for tympanometers from MAICO and MRS Resonance. Also for eTYMP USB by BioMed Jena The headband can be changed by the user.GTIN: (01)05711117224825Scope of delivery: 1 pieceevidENT -Shop Article 490
Available, delivery time: 1-3 days
Cushion head band HDA39 for headphone DD45
Headband for headphone Interacoustics DD45 and DD45C. Suitable for audiometers of the manufacturer MAICO, Interacoustics, MRS Resonance. The upholstery can be changed by the user. Shipment: 1 pieceevidENT-Shop Article 487Original Interacoustics item no. 8010886
Available, delivery time: 1-3 days
Moospolster pads for contraphones Radioear DD45 for tympanometer
Replacement pad P4471 for the opposite side of the DD45C. Suitable for MAICO, Interacoustics, MRS Resonance headphones. Material: foam rubber. The pad holds with Velcro and is easy to replace.Scope of delivery: One pair of cushions (2 pieces)evidENT-Shop Article 491
Available, delivery time: 1-3 days
Screws for DD45 for earphone Radioear DD45
Two grub screws for headphone capsule DD45. Metric thread.One set contains 2 grub screws with matching Allen key.Scope of delivery: 1 setevidENT-Shop Article 638
Available in 4 days, delivery time 1-3 days
Amplivox Audiocups, headset
Sound absorbing caps Audiocups Amplivox for audiometry.Acoustic caps for the installation of existing TDH39 or Radioear DD65 transducers.Assembled, ex transducers. P4910.Scope of delivery: 1 piece evidENT-Shop Article 720
Available, delivery time: 1-3 days
Cushion for TDH39 and DD45 headsets
Replacement ear cushions for the TDH39 headphones by Telephonics and DD45 and the DD45C contraphones by Radioear.Used in audiology with a range of audiometers: for example all audiometers from Interacoustics (AC33, AC30, AD229, Equinox), KIND, Steinmeier AUDIOmed, MAICO and others.GTIN: 4260585410779Scope of delivery: 1 pair ( = 2 pieces)evidENT-Shop Article 250
Available, delivery time: 1-3 days
Ring pad HMEC 222 for headphones Sennheiser HDA200, Telephonics TDH39 as well as RadioEar DD65 v2 and DD450
HMEC 222 ring pad for Sennheiser HDA200 headphones.Also suitable for headphones with Peltor sound insulation capsTDH39 from Telephonics and DD65 v2 and DD450 from RadioEar.Sennheiser original article number 050799Radioear Nr. P4461 (Item #8517499); 3M HY51Scope of delivery: One pair (2 pieces)evidENT-Shop Article 328
Available, delivery time: 1-3 days
Allen key for TDH39 and DD45
Allen key for grub screws for headphone capsule Telephonis TDH39. Shipment: 1 piece Evident shop Article 798
Available, delivery time: 1-3 days
Headband HB-7 for Telephonics TDH39 Earphones
Comfortable and lightweight headband HB-7 for Telephonics earphones TDH39 or Radioear DD45. Easy to Adjust. Fits adults and children. Pat.No. 376151Tough Stainless steel bands which maintain original shape, covered with soft rubber tubing. Strong machined one-piece yokes fitted into self-lubricating molded plastic brackets.Weight: Approximately 130 grams without earphones.Scope of delivery: One pieceevidENT-Shop Article 290
Available, delivery time: 1-3 days
Cable with 2 x 6.3 mm mono jack plug for supra-aural TDH39/DD45
Replacement cable for TDH39 and DD45 headphones with colour-coded 6.3 mm / 1/4" mono jack plugs. Type P4432.For use with audiometers such as Interacoustics, KIND, Steinmeier AUDIOmed, GSI.The cable can be easily changed with the help of a fine screwdriver or Allen key.Scope of delivery: One cableevidENT-Shop Article 60
Available, delivery time: 1-3 days
Cordset / Connection Cable 90° for Headphones TDH39 and DD45
Replacement cable for TDH39 and DD45 headphones. For use with audiometers such as Interacoustics, KIND, Steinmeier AUDIOmed. With colour-coded 6.3 mm jack plugs, 90° wound mono plug, nickel-plated.The cable can be easily replaced with a fine slotted screwdriver.Scope of delivery: 1 cableevidENT-Shop Article 148
Available, delivery time: 1-3 days
Stereo Y-Cord / Connection Cable for Headphones TDH39 and DD45
Replacement cable for TDH39 and DD45 headphones. For use with audiometers such as MRS r17a, r37a audiometers. With color-coded 6.3 mm straight STEREO jack plugs, gold-plated.The cable can be easily replaced using a fine slotted screwdriver.Scope of delivery: One cableevidENT-Shop Article 150
Available, delivery time: 1-3 days
Earphone cable for earphone TDH39 and DD45C
Replacement cable with yellow marking for the contra-headphones. Suitable for the tympanometers of Interacoustics AT235, AT235h, AA220, AA222 and KIND DI921, Steinmeier AUDIOmed SAT15, Kamplex KLT26. Also suitable for the new tympanometers of Interacoustics Titan and AT235neu. Cable with 6.3 mm jack plug, mono. Scope of delivery: one cable evidENT-Shop Article 228
Available, delivery time: 1-3 days
Cable extension for THH39 cables
High-quality cable extension for the TDH39 supra-aural headphones. Technical data:- Cable length: 5 meters- Bushes: 2 x lockable straight bush couplings with kink protection and metal housing (6.35 mm) - Plug: 2 x 6.35 mm jack audio connectors with metal housing and gold-plated contactsScope of delivery: 1 pieceevidENT-Shop Article 602
Available in 4 days, delivery time 1-3 days
Cable with 1 x 6.3 mm straight stereo jack plug for headphones TDH39/DD45
Replacement cable for TDH39 headphones. IEC-S2 symmetric, stereo Earphone Cable, plug: 1 x 6.3 mm stereo jack plug; straight version. For use with audiometers. E.g. the Earscan 3 Manual Audiometer (ES3M), Earscan 3 Screening Audiometer (ES3S) from Micro Audiometrics. The cable can be easily replaced with a fine slotted screwdriver.Scope of delivery: One cableevidENT-Shop Article 274
Available, delivery time: 1-3 days
Cable with 2x 3.5 mm mono jack plug for TDH39/DD45
Replacement cable for TDH39 and DD45 headphones. For use with audiometers such as MRS r07a and R17a audiometers. With color-coded 3.5 mm straight mono jack plugs, gold-plated.The cable can be easily replaced using a fine slotted screwdriver.Scope of delivery: 1 cableevidENT-Shop Article 670
Available, delivery time: 1-3 days
Dual Mono 5 Meter Earphone Cable for Headphones TDH39 and DD45
Extra long replacement mono cable for TDH39 and DD45 headphones. For use with audiometers such as Interacoustics, KIND, Steinmeier AUDIOmed. With colour-coded 6.3 mm jack plugs.The cable can easily be changed using a fine screwdriver. Type P4432X.Dimensions: Cable length: 5 metersScope of delivery: 1 cableevidENT-Shop Article 633
Available, delivery time: 1-3 days
Cable with cable lugs, without plug for headphones TDH39
Replacement cable for supra-aural audiological headphones TDH39 from Telephonics or DD45 from Radioear. On the device side without plug, but with cable lug (see illustration).Scope of delivery: 1 cableevidENT-Shop Article 240
Available, delivery time: 1-3 days
Replacement headphone cord for RadioEar DD65v2
Replacement cable for the new HB6510 for the headphones TDH39 or DD65 V2 or DD450. Also suitable for Sennheiser HDA200.Not suitable for classic 3M Peltor caps. For installation in the sound insulation caps. For DD65v2 headphones produced between 2016 and 2017. For use with audiometers from e.g. Interacoustics, MAICO, Steinmeier AUDIOmed.Plug: 30 degrees, 2x 6.3 mm gold-plated mono jack plugs. Scope of delivery: 1 cable evidENT-Shop item 855
Available, delivery time: 1-3 days
RadioEar Circumaural headband (replacement kit for Peltor) 30 degree jack
RadioEar Circumaural headband (replacement kit for Peltor) 30 degree jack. Sound attenuating caps HB6510 from Radioear for audiometry.As a replacement for the Peltor sound insulation caps for the installation of existing Telephonics TDH39 or Radioear DD65 and DD450 headphones. The cables of this type are detachable from the circumaural headphones and can therefore be easily replaced in the event of a cable break. Radioear Nr. HB6510 (Item #8520868)Scope of delivery: headband, two ear pads and cable with 2 x 6.3 mm jack plugs.evidENT shop item 266
Available, delivery time: 1-3 days
RadioEar Circumaural headband (replacement kit for Peltor) without cable
RadioEar Circumaural headband without cable.As a replacement for the Peltor sound insulation caps for the installation of existing Telephonics TDH39 or Radioear DD65 and DD450 headphones. As an alternative to the 3M Peltor headband, Radioear has made a kit that enables users of Peltor headsets with Telephonics TDH39/49/50 or RadioEar DD45, to replace the headband if necessary. Radioear Nr. 4462 (Item #851613)Scope of delivery: headband, two ear pads.evidENT shop item 256
Available, delivery time: 1-3 days