Ambu® BlueSensor P-00-S - Wet gel electrodes for short-term use
| Quantity | Unit price |
|---|---|
| To 9 |
€16.90
|
| From 10 |
€15.35
|
Available, delivery time: 1-3 days
Sensor material: silver / silver chloride, gel type: wet gel, connection type: push button.
Dimensions: Electrode size (L x W max. in mm): 40.8 x 34, skin contact surface (diameter in mm): 34 mm
Scope of delivery: One bag with 50 electrodes
evidENT-Shop Article 67
Similar Products
The Ambu WhiteSensor 4535M features a wet gel with good adhesion to ensure a good signal quality during short-term ECG monitoring applications. Thanks to the flexible foam backing material, the electrode ensures ease of use and comfort during application. It is conveniently presented with 3 pieces per strip.Highly conductive wet gelGood adhesionComfortable foam backingSensor material: Silver, silver chloride (Ag/AgCl)Gel system: Wet gel Dimensions: Electrode size (L x W max. in mm): 32 x 44 mm, adhesive area: 1.079 mm²Scope of delivery: One bag with 60 piecesevidENT-Shop Article 794
Available, delivery time: 1-3 days
Accessories
Electrode cable with push-button adapter and DIN plug (DIN 42 802). Patient cable can be used for e.g. ECG devices and ABR devices the brainstem audiometry of evostar, evoselect and Corona (Pilot Blankenfelde) or Octavus ABR and Double-Scan (Otometrics) and others.For eVEMP from Biomed Jena. Features: cable length: 50 cm, color: yellowScope of delivery 1 pieceevidENT-Shop Article 691
Available, delivery time: 1-3 days
The 3M™ Skin Prep Abrasion Band is used for optimal and gentle skin preparation for the best possible drainage quality. The abrasion band is a gentle abrasive material for removing the upper non-conductive skin layer. Thus it enables a high quality drainage. In two studies, a significantly reduced skin resistance could be demonstrated by using the 3M Abrasion Band. When used correctly, the 3M abrasive band made of fine sandpaper material protects the patient's skin and minimizes skin irritations. Application: A 2 to 3 cm long piece is removed from the dispenser and gently wiped over the area where an electrode is to be placed. The electrode with the gel side is then immediately glued to the treated area. Manufacturer: 3M, manufactured in Canada. Manufacturer number 2236.Dimensions: width: 3/4 inch (18,1 mm), length: 196 inch (5 meters)Scope of delivery: 1 rollevidENT-Shop Article 468
Available, delivery time: 1-3 days
Electrode cable with push-button adapter and DIN plug (DIN 42 802). Patient cable can be used for e.g. ECG devices and ABR devices the brainstem audiometry of evostar, evoselect and Corona (Pilot Blankenfelde) or Octavus ABR and Double-Scan (Otometrics) and others.Features: cable length: 50 cm, color: redScope of delivery 1 pieceevidENT-Shop Article 690
Available, delivery time: 1-3 days