No results were found for the filter!
Eartips 11 mm, yellow, for OAE/Tymp probes and... Eartips for OAE devices made by Interacoustics (Otoread), MAICO (Eroscan), Madsen Capella². For Otodia and ELIOS from Echodia for the measurement of otoacoustic emissions TEOAE and DPOAE. Also for tympanometer GN Otometrics Oszilla...
Order number: 2-73000027
€10.00 *
Ready to ship today,
Delivery time appr. 1-3 workdays
audinell - Type ORLICLEAN cleaning tablets for... audinell is a self-cleaning special preparation for ear molds. audinell is chemically equivalent to the proven ORLICLEAN cleaning tablets. These are no longer produced. Laß-Shop: TY 060.00 Scope of delivery: One pack with 20 tablets...
Order number: 2-71500100
From €7.50 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Cerumex ear rinsing bowl for ATMOS and... Water collecting tulip type "Cerumex" for connection to the extraction system. Ear rinsing bowl for ear rinsing with ATMOS units: C21, C31, Servant 5 C. Also suitable for Dantschke Medicenter units (newer model). Scope of delivery: one...
Order number: 2-62200040
€136.85 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Ear rinsing bowl for Eschbach units Kidney dish with drain, for removal from Eschbach units. With a special connection piece for Eschbach units. Eschbach article 02990010. Scope of delivery: 1 piece evidENT-Shop item 857
Order number: 2-62500003
€107.40 *
Delivery time approx. 20 working days
KREPPFIX tongue lobules foil pack with 6 rolls,... Hygienic Kreppfix tongue flap strips with perforation. Kreppfix tongue flaps for the ENT physician are used for endoscopic examination of the nose and throat. The wet-strength crepe strips are available in rolls. As consumables for the...
Order number: 2-70600000
From €20.65 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Halogen lamp 6 Volt / 35 Watt Halogen lamp 6 Volt / 35 Watt with aluminium reflector (Phillips 6430) Ø 56 mm, base B 15 d, beam angle 14°. Rated voltage: 6 V , Rated wattage: 35 W Scope of delivery: 1 piece evidENT-Shop Article: 887
Order number: 2-69600031
€40.40 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Halogen lamps with reflector MR16 12 Volt /75... Halogen lamp with reflector (OSRAM HLX 64615) Ø 50 , length 42 mm, base GZ 6,35 Xenon instead of krypton as the filler gas (XENOPHOT HLX versions) Luminous flux up to 10 % higher with same power consumption (XENOPHOT HLX versions) Rated...
Order number: 2-69600017
€14.10 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Halogen lamps with reflector 12 Volt /100 Watt High-power halogen mirror lamp with reflector (OSRAM HLX 64627) Ø 50 , length 42 mm, base GZ 6.35 Filler gas xenon instead of krypton (XENOPHOT HLX version) Up to 10 % higher luminous flux with the same power consumption (XENOPHOT HLX...
Order number: 2-69600018
€15.35 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Halogen lamp Osram HLX 64634 15 Volt / 150 Watt Halogen lamp with reflector (OSRAM HLX 64634) Ø 50 , length 42 mm, base GZ 6.35. Minimum diameter of lamp housing 51.0 mm. Filler gas Xenon instead of Krypton (XENOPHOT HLX version) Up to 10 % higher luminous flux with the same power...
Order number: 2-69600011
€17.55 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Halogen lamp OSRAM HLX 64625 12 Volt / 100 Watt Low-voltage halogen lamp without reflector (OSRAM HLX 64625) Ø 11.5 , length 44 mm, base G 6.35. Minimum diameter of lamp housing 12.0 mm. - Filling gas Xenon instead of Krypton (XENOPHOT HLX version) - Up to 10 % higher luminous flux...
Order number: 2-69600030
€9.40 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Halogen lamp OSRAM HLX 64633 15 Volt / 150 Watt Low-voltage halogen lamp without reflector (OSRAM HLX 64633) Ø 11.5 , length 44 mm, base G 6.35. Minimum diameter of lamp housing 12.0 mm. - Filling gas Xenon instead of Krypton (XENOPHOT HLX version) - Up to 10 % higher luminous flux...
Order number: 2-69600012
€18.80 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Halogen low-voltage lamp without reflector... Low-voltage halogen lamp without reflector (OSRAM HLX 64640) Ø 13.5, length 50 mm, base G 6.35, minimum diameter of lamp housing 11.0 mm Filling gas Xenon instead of Krypton (XENOPHOT HLX version) Up to 10 % higher luminous flux with the...
Order number: 2-69600013
€9.40 *
Delivery time ca. 3-4 Workdays
Halogen lamp OSRAM HLX 64657 24 Volt / 250 Watt Low-voltage halogen lamp without reflector (OSRAM HLX 64657) Ø 13.5 , length 55 mm, base G 6.35. Minimum diameter of lamp housing 14.0 mm. - Up to 10 % higher luminous efficacy compared to standard lamps (HLX) - Immediate available light...
Order number: 2-69600015
€9.40 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Halogen lamp Narva-EPV / Osram 64619 14,5 Volt... High-power halogen reflector lamp (corresponds to OSRAM 64619) Ø 51.0 mm , length 45 mm, base GX 5.3. Minimum diameter of lamp housing 51.0 mm. Rated voltage: 14.5 V , rated wattage: 90 W Maximum colour temperature 3200 K Scope of...
Order number: 2-69600023
€34.45 *
Delivery time ca. 3-4 Workdays
Dr. Fischer microscooplamp 15W 6V 00843121 Microscooplamp Dr. Fischer. Product code manufacturer: 00843121 Rated voltage: 6 V , rated power: 15 W Scope of delivery: 1 piece evidENT-Shop Article 885
Order number: 2-69600019
€26.00 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Bulb for Zeiss OPMI 9 Dr. Fischer 00843110 Microscope lamp 30W/6V P47D. Pre-centered special version. For Zeiss OPMI1, Zeiss OPMI6, Zeiss OPMI 9 (39-01-58). 6 V, 30 W, base: P47D Diameter: 35 mm; Dimension LxWxH (mm): 63 x 48 x 48. Read-Shop: LA 006.00 Scope...
Order number: 2-69600010
€24.75 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Incandescent lamp 6 Volt / 1 Amp Bulb for headlamp according to Denecke Lüscher. Diameter: 15 x 30 mm, base E 10. Scope of delivery: 1 piece evidENT-Shop article 888
Order number: 2-69600040
€6.90 *
Ready to ship today,
Delivery time appr. 1-3 workdays
HEINE XHL Xenon Halogen spare bulb #037 XHL Xenon Halogen spare bulb 2.5 V for alpha Otoscope, alpha+ F.O. Otoscope, BETA100 Otoscope, K100 Otoscope, mini2000 F.O. Otoscope, alpha Tongue blade holder, alpha+ Tongue blade holder, Curved Laryngeal Mirror, mini3000 Tongue blade...
Order number: 2-69600061
€28.80 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Otoskop Heine XHL Xenon Halogen spare bulb #044 XHL Xenon Halogen spare bulb 3.5 V for alpha+ Finoff, Glaucotest, Standard F.O. 4 NT Laryngoscope Handle, F.O. 4 SLIM NT Laryngoscope Handle, F.O. 4 SHORT NT Laryngoscope Handle, Angled F.O. Laryngoscope Handle and Illumination Head for...
Order number: 2-69600060
€36.00 *
Ready to ship today,
Delivery time appr. 1-3 workdays
HEINE XHL Xenon Halogen Bulb X-002.88.046 HEINE XHL Xenon Halogen Bulb X-002.88.046 Scope of supply: 1 piece evidENT-Shop Article 897
Order number: 2-69600062
€29.75 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Replacement bulb for VERSABRITE medic Replacement bulb for halogen lamp VERSABRITE medic Laß-Shop LA 021.00 Scope of delivery: 1 piece evidENT store article 861
Order number: 2-69600021
€10.35 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Replacement headband for VERSABRITE medic Replacement headband for halogen lamp VERSABRITE medic Laß-Shop LA 021.01 Scope of delivery: 1 piece evidENT store article 862
Order number: 2-69600022
€8.15 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Adapter for VERSABRITE medic This adapter turns the VERSABRITE medic into a portable cold light source. All endoscopes with Storz and Wolf connection can be adapted with one handle. Lass store AD 020.00 Scope of delivery: 1 piece evidENT store Article 860
Order number: 2-69600020
€94.90 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Incandescent lamp 6 Volt / 1 Amp Bulb for headlamp Clar. Diameter: 18 x 30 mm, 6V / 1A, base E 10. Scope of delivery: 1 piece evidENT-Shop article 889
Order number: 2-69600041
€7.20 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Thermal paper roll 57 mm wide (14 m), for... Ideal for the tympanometers Interacoustics Titan and MAICO easyTYMP, as well as for the thermal printer of the OAE screener Otoread from Interacoustics. When using the thermal printer Sanibel MPT-II also suitable for ATMOS Rhino 200....
Order number: 2-70000012
From €4.40 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Thermal paper roll 57 mm wide (25 m), for... Suitable for thermal printer of the Hortmann Tymp 82, OAE-Screener Otodynamics Otoport Lite, Otoport Flexi and Otoport Advanced, Echocheck, and for the older external printer of Maico EroScan and Interacoustics Otoread. Dimensions:...
Order number: 2-70000002
From €4.40 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Thermal paper roll 63 mm wide, for MAICO... Suitable for the thermal printer of the MAICO MA630, SI24 or SI 26, MI26, MAICO MI24, MI 26. tympanometers. Dimensions: width: 63 mm, roll outer diameter: 55 mm, roll inner diameter: 12 mm Scope of delivery: 1 thermal paper roll...
Order number: 2-70000022
From €4.40 *
Delivery time ca. 3-4 Workdays
Thermal paper roll 80 mm wide, for medical devices High quality thermal paper rolls for the thermal printer of the handheld Tympanometer Interacoustics MTP10. Dimensions: width: 80 mm, length: 25 m, roll outer diameter: 46 mm, roll inner diameter: 12 mm Package content: 1 roll...
Order number: 2-70000000
From €5.00 *
Ready to ship today,
Delivery time appr. 1-3 workdays
110 mm thermographic paper for medical devices Suitable for thermal printers with a variety of devices in audiology, vestibular and rhinomanometry: - Interacoustics Audiometer AC40, AC33, Impedance Audiometer AT22t, AZ26, AT235. - Tympanometer Resonance MRS r26m, r36m. -...
Order number: 2-70000001
From €5.00 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Thermal paper roll 112 mm wide, for medical... Thermal paper rolls Suitable for thermal printers with different spirometers, e.g. for - Spirometer CHEST Microspiro Hi 501/ Hi 601 - Fukuda Sanyo Spiromed 250 - Bosch Spiro 601. Dimensions: width: 112 mm, length: 25 m, roll outer...
Order number: 2-70000008
From €5.00 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Thermal paper roll 50 mm wide, grey millimetre... Special thermal paper rolls with 50 mm width and grey millimetre print. suitable for thermal printers of the HORTMANN 1-channel ENG from model year 11/96 (type 61 as well as type 72). Dimensions: width: 50 mm, length: 15 m, roll outer...
Order number: 2-70000011
From €8.75 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Thermal paper roll 55 mm wide, for ATMOs... Suitable for the thermal printer of the ATMOs Sinusscope 3S (ATMOS article no. 507.1010.0 with thermal printer. Dimensions: width: 55 mm, roll outer diameter: 55 mm, roll inner diameter: 15 mm With red millimeter print. Package content:...
Order number: 2-70000023
€8.75 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Thermal paper roll 114 mm wide, red millimetre... Suitable for the Esmed ENG / ABR thermal printer. Dimensions: width: 114 mm, roll outer diameter: 50 mm, roll inner diameter: 12 mm , with red millimetre print Scope of delivery: 1 thermal paper roll evidENT-Shop Article 877
Order number: 2-70000026
€8.75 *
Delivery time ca. 3-4 Workdays
Printer paper roll 57 mm wide, printed for GSI... Plain paper, suitable for tympanometer GSI 28 / GSI 28A. Dimensions: width: 57 mm, length: 37 m, roll outer diameter: 58 mm, roll inner diameter: 12 mm, printed. Laß-Shop TY 008.00 Scope of delivery: 1 piece evidNET store article 863
Order number: 2-70000013
€8.75 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Paper roll 114 mm wide, for medical devices For use in a variety of devices in audiology, vestibular and rhinomanometry Suitable for - Hortmann BERAport 1 - Hortmann Evoport - Allergopharma Rhinotest MP500 - A-Scan SAM2000 (manufacturer Steinmeier AUDIOmed). Dimensions: width: 114...
Order number: 2-70000004
From €8.75 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Paper roll 114 mm wide, red millimetre print Paper roll with red millimeter print. For use with the Welch Allyn CP 50 ECG machine and others. Dimensions: width: 114 mm, length: 20 m, roll outer diameter: 40 mm, roll inner diameter: 12 mm delivery : 1 paper roll evidENT-Shop Article...
Order number: 2-70000020
€8.75 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Paper roll 114 mm wide, for Otopront Sinus... Normal paper roll for use with Otopront Sinus Echoscopes digital 4 printed. Laß-Shop US 005.00 Dimensions: width: 114 mm, length: 16 m, roll outer diameter: 35 mm, roll inner diameter: 15 mm. Scope of delivery: 1 paper roll evidENT-shop...
Order number: 2-70000028
€8.75 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Thermal paper folding block for ATMOS ENG printer Folding block of thermal paper for ENG system from ATMOS Medizintechnik. Laß-Shop EN 005.00 dimensions: width: 125 x 150 mm, unprinted Scope of delivery: one block with 300 sheets evidENT-Shop article 909
Order number: 2-70000027
€8.75 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Sony UPP-110S Video Printer Paper Video printer paper for Sony monochrome printer UPP-110S and for the following B/W printers: UP-860CE, UP-890CE, UP-895CE, UP-D860E, UP-D890, UP-D895. Material: b/w-Plastic. Dimensions: width: 110 mm, length: 20 m Scope of delivery: 1...
Order number: 2-70000006
From €10.00 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Sony UPP-110HD Video Printer Paper High resolution original video printer paper Sony UPP-110HD for Sony monochrome printers, for the following B/W printers: UP-860CE, UP-890CE, UP-895CE, UP-D860E, UP-D890. Material: b/w High Density. Dimensions: width: 110 mm, length: 20...
Order number: 2-70000007
From €19.40 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Sony UPP-110HG, Hochglanz-Videodrucker-Papier Used mainly for ultrasound, dentistry and microscopy applications. High-gloss original video printer paper Sony UPP-110HG for Sony black and white printers. A6 high-gloss printer paper (type V) for black and white printing with the...
Order number: 2-70000014
From €19.40 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Mitsubishi K61B-CE / KP61B-CE Standard Thermal... Video printer paper for Mitsubishi monochrome printers, K61B / KP61B for B/W printers and for printers P61E, P65E, P66E, P68E. Dimensions: length: 21 meters, width: 110 mm Scope of delivery: 1 roll of thermal paper in foil evidENT-Shop...
Order number: 2-70000003
From €10.00 *
Ready to ship today,
Delivery time appr. 1-3 workdays
Mitsubishi K65HM Video Printer Paper High-resolution video printer paper K65HM / KP65HM-CE for Mitsubishi monochrome printers, for printers P66E, P68E, P90E, P91E or P93 E. Material: b/w-High-Density. Dimensions: width: 110 mm, length: 21 m Scope of delivery: 1 roll of...
Order number: 2-70000005
From €19.75 *
Ready to ship today,
Delivery time appr. 1-3 workdays